Running 2 Youtube Channel : The Masti Adda (Fun based ) : The Knowledge Adda (Knowledge based) : Subscribe for Knowledge with Fun....
Written by @
After Pressing ESC we will get this Screen, In this we have provide value as


Name- Substrate
Xmin: ws/2    Xmax: -ws/2             (ws-Width of Substrate in mm)
Ymin: ls/2      Ymax: -ls/2               (ls-Length of Substrate in mm)
Zmin: 0         Zmax: h                   (height of Substrate)

Now putting these variable Click on Preview and Provide value of Variable as ws=40,ls=40 and hs=1.524 (Except value of hs, you can determine any value)


1 Now select Material, Click on Drop Down List and Select Load from the Material Library and Select FR-4 (lossy) and click on Load then Press OK



Now substrate has been created and we have to repeat same process for creating Ground.
Click on Create Brick and Press ESC same as discussed in Previous procedure . Now we will get Screen as previous Step . Now Assign Variable for Ground as

Name- Ground
Xmin: wg/2    Xmax: -wg/2             (ws-Width of ground in mm)
Ymin: lg/2      Ymax: -lg/2               (ls-Length of ground in mm)
Zmin: 0         Zmax: -t                    (thickness of ground)
Now putting these variable Click on Preview and Provide value of Variable as wg=40,lg=40 and t=0.07


Previous                                                              Next